Part 117 Rest / Duty Requirements with the New LogTen Pro
NEW! Now with the New LogTen Pro you can share Smart Groups direct from your iOS device by tapping on the 'i' to the right of the smart group (rest, duty, limit etc.), then tapping on the 'Action' button on the top right and choosing 'Share' (via airdrop, text message or email!) - Check out the tutorial video
On the Mac, press control and then click on the group you wish to share and choose 'Share'.
This article covers the major parts of FAA Part 117 rest / duty rules and shows how LogTen Pro can help track these new regulations
The monthly limit has now changed to 100 hours of total flight time in any consecutive 672 rolling hours. Additionally, the yearly limit is now 1000 flight hours in any 365 rolling day period.
These limits can be tracked in LogTen Pro using a normal Limit Group:
Click/tap here to download the '100 in 672' smart group direct to LogTen Pro
Click/tap here to download the '365 days' smart group direct to LogTen Pro
Part 117 rules also contain two flight duty limits, which can be tracked in the New LogTen Pro with the new FDP fields (specifically FDP Start, FDP End, and Total FDP):
- 60 flight-duty period hours in any consecutive 168 hours
- 190 flight-duty period hours in any consecutive 672 hours
Both of these limits can also be tracked with Limit Groups:
Click/tap here to download the '168 Hours Duty' smart group direct to LogTen Pro
Click/tap here to download the '672 Hours Duty' smart group direct to LogTen Pro
In order to ensure accurate tracking of duty times, make sure that the Duty->FDP Total field is being updated. We recommend entering your FDP Start time on your first flight of the day and FDP End time on the last flight of the day.
The rules require that no crew member may accept an assignment unless given a rest period of at least 10 consecutive hours prior to duty.
The amount of rest between each duty period is now easily discernible in the New LogTen Pro Time Loupe feature on the Plan page of the Radar tab:
It is important to note that Rest periods are predicated on the On Duty/Off Duty fields (and not the FDP fields). By filling out your Off/On Duty times for the day LogTen Pro will automatically calculate your Rest Before Duty and use this time on the New LogTen Pro timeline showing if you have legal rest.
Finally, LogTen Pro now allows you to track the following requirement:
Before beginning any reserve or FDP assignment, the flightcrew member must have received a 30 consecutive-hour rest within the past 168 consecutive hours that precedes the beginning of the FDP.
To set this up, click the + button and create a new Currency Group, then configure in the following manner to allow you to show the remaining hours until another 30 hour rest period is required:
Click/tap here to download the 'Rest' smart group direct to LogTen Pro
Maximum daily flight time limit is based on start time and is either 8 hours or 9 hours for unaugmented crews.
You can create a Limit Group to make sure your next flight will not exceed your daily limit. Unfortunately at this time LogTen Pro is not able to tell if a pilot's daily limit is 9 or 8 hours, a sample 8 hour limit which can be created as shown:
For users who track dates in local time (users who have their logbook set to local instead of Zulu) we recommend using "In Last 14 Hours" to get a more accurate reading of daily flight time due to LogTen Pro using Zulu dates for groups. *Please see the footnote for an explanation on why we choose 14 hours.
Augmented crews are also subject to daily limits of 13 hours for 3-person flight crews or 17 hours for 4-person crews; Limit Groups for these regulations can be created following the same model as above.
If you have an 8 hour or 9 hour limit depending on start time and number of legs you can create both limit groups and only use the one that applies to the limits of the current day.
The maximum flight duty period is based on start time and the number of flight segments. The Duty/Rest Bar is the best way for a pilot to see their "live" flight duty time.
On the 1st, the following flights were flown:
- KMSP - KFSD from 1720 local to 1828 with an On Duty time of 1635 (45 minute show time)
- KFSD - KMSP from 1915 - 2014
The following flight was scheduled and then delayed:
- KMSP - KATW originally scheduled 2135 to 2242 but delayed until 0035
To properly track your duty time:
- Update the Off Duty time to 0142 (the original scheduled in time of 2242, plus 3 hours):
- Refer to the duty information in the Duty/Rest bar on the Radar page:
The Duty bar indicates 6:15 of elapsed duty time; if the next flight departs as scheduled, the flight duty day will be completed with 9:07 hours of duty time.
In this scenario (with a start time in the 1700-2159 range and 3 legs), a pilot's daily duty limit is 11 hours; therefore, this flight can be completed and the pilot will remain in compliance with the regulations. Additionally, any flight assignment with 4:45 or less of duty time (11 hours - 6:15) can be accepted at the current point in time.
It is important to note in this example that the delay resulted in the next rest period getting reduced to 9:36 hours. In this case the next day's On Duty time would have to be delayed 24 minutes to ensure 10 hours of rest.
In this example assume our On Duty time is 11:18 AM local on the 16th (11:48 - 30 minute show time) and that we are in our acclimated time zone flying with an unaugmented crew. An 11:18AM On Duty time with 4 flight segments allows for a 13-hour maximum flight duty period.
The Duty bar shows the current scheduled duty period time as 10:50 minutes. Assuming no schedule changes, the current duty day would comply with the maximum flight duty period limit.
The Duty/Rest bar, while on flying duty, will also show the planned rest opportunity for the evening. In the above example the "Planned Rest" period is 11:22. As long as the scheduled Off Duty time is not exceeded by 1:22 the required rest period of 10 hours will be in compliance.
Further clarification of FAA definitions and how they relate to LogTen Pro:
Duty means any task that a flightcrew member performs as required by the certificate holder, including but not limited to flight duty period, flight duty, pre- and post-flight duties, administrative work, training, deadhead transportation, aircraft positioning on the ground, aircraft loading, and aircraft servicing.
LogTen Pro uses On Duty and Off Duty fields and auto-fills the Total Duty time based on these times. LogTen Pro uses these times not only to figure out Total Duty but also rest times (the Rest Before Duty field).
Flight duty period (FDP) means a period that begins when a flightcrew member is required to report for duty with the intention of conducting a flight, a series of flights, or positioning or ferrying flights, and ends when the aircraft is parked after the last flight and there is no intention for further aircraft movement by the same flightcrew member. A flight duty period includes the duties performed by the flightcrew member on behalf of the certificate holder that occur before a flight segment or between flight segments without a required intervening rest period. Examples of tasks that are part of the flight duty period include deadhead transportation, training conducted in an aircraft or flight simulator, and airport/standby reserve, if the above tasks occur before a flight segment or between flight segments without an intervening required rest period.
The 117 duty limits are based on Flight Duty Periods. The New LogTen Pro adds three new fields to specifically track Flight Duty Periods, FDP Start, FDP End, and Total FDP. Please see the groups above for tracking FDP limits.
Rest period means a continuous period determined prospectively during which the flightcrew member is free from all restraint by the certificate holder, including freedom from present responsibility for work should the occasion arise.
LogTen Pro adds the new Rest Before Duty field for tracking non-nightly rest (30 hours of consecutive rest) as described above. For nightly rest requirements the time scrubber is the best source of rest between Duty periods.
As always, if you have any questions please let us know.
When starting a new Flight Duty Period there is a possibility that your flights from the night before will show (if you had less than 14 hours rest) but after 4 hours the group will read correctly because you had 10 hours of rest the night before at a minimum and now you are 4 hours into your current duty day. If you want to change the 'In Last' to 10 hours this will ensure your group will never read the flights from the day before. Just keep in mind that in a 14 hour duty day your first 4 hours will fall outside of the window of the daily limit group. The end of the duty day is much more important than the beginning, you are not going to break a daily flight limit at the beginning of the day. If you are going to approach a daily limit it will be at the end of the day, this is why "In Last 14 Hours" is a reasonable tradeoff when deciding how far to look back. If you are extending past 14 hours then it would be prudent to change this group to make sure that all your flights that day are included in this group.